Anvil Heat Extractor Hood Fiberglass 1969-1970

More Parts from Anvil

Review It!

Anvil Part Number: 010637

Earn 695 RPM Points What's This?

Anvil Heat Extractor Hood Fiberglass 1969-1970

Play Anvil Heat Extractor Hood Fiberglass 1969-1970 Video

Product Description

Anvil Fiberglass Heat Extractor Hood for 1969-1970 Mustangs.

Lower under hood temps and relieve built up air pressure with this custom designed hood. Utilizes factory hinges and has provisions for the OEM latch. You can shed a lot of weight by replacing the stock steel hood with this functional fiberglass hood.

Hood pins are recommended for all carbon fiber or fiberglass hoods. Hood pins should be used as a precautionary measure in case the latch gives out. Anvil hoods are bolt on, just like steel hoods, but the threaded inserts are imbedded as opposed to being welded in the case of steel hoods. The undersides of all carbon fiber hoods have a perimeter frame with a finish much like the top side.

Anvil auto produces interior and exterior pieces in carbon fiber and fiberglass. All fiberglass parts have an OEM fit but are much lighter. Anvil also makes carbon fiber parts which are lighter and more stable than fiberglass parts. Parts will not warp in the sun unless undue stress is applied to them (ie, hood springs that are too strong). All parts have a UV clear coat on them, but if you decide to paint then, you will need to use a UV clear coat. Fiberglass parts can be painted body color. Scuff sand the surface, primer, paint, and clear coat.